
La filtración fiable comienza con especificaciones verificadas.
Air Oil Separator Part 72-12302-0801-23
Elemento de sustitución de elementos del filtro del compresor del aire
Elementos de filtro de compresor de aire
72-12302-0801-23 is a built-in high-efficiency oil-gas separator filter element specially designed for screw air compressors. It is a core consumable that guarantees the cleanliness of compressed air
Los pedidos son confirmados por nuestro equipo por precio, compatibilidad y entrega.
Especificaciones verificadas para una selección segura.
Confirme los requisitos de instalación con el manual del equipo o la documentación original.
| Altura | 445 mm |
|---|---|
| Diámetro exterior | 115 mm |
| Diámetro interior | 76 mm |
| Peso | 2.5 kg |
| Calificación de filtración | 0.1 μm |
| OEM / Referencia Cruz | KD120-051,SA463MY |
72-12302-0801-23 is a built-in high-efficiency oil-gas separator filter element specially designed for screw air compressors. It is a core consumable that guarantees the cleanliness of compressed air and the oil circuit circulation of the unit.
Core Advantages and Value
• Reduced oil consumption.
The residual oil content of the exported compressed air is controlled within 1~3 ppm, which significantly cuts lubricating oil loss and replenishment costs.
• Energy saving and consumption reduction.
Low initial pressure difference (≤ 0.02 MPa) and low airflow resistance help reduce the operating power consumption of the air compressor.
• Protection of downstream equipment.
It effectively prevents oil from entering dryers, precision filters and pneumatic actuators, extending the service life of the entire air source system.
Core Structure and Materials
• Multi-layer ultra-fine glass fiber filter media.
Imported composite glass fiber is adopted as the core filtration layer, featuring high dust holding capacity and oil mist capture efficiency, which can effectively intercept tiny oil droplets at the 0.1-micron level.
• High-strength rust-proof frame.
High-strength perforated metal support meshes are fitted on both inner and outer layers to withstand instantaneous pressure fluctuations during unit start-stop, loading and unloading, preventing the filter element from deformation or breakdown.
• Anti-static sealing design.
High-temperature resistant sealing gaskets and anti-static flow guide pieces (or conductive pins) are equipped on the flange end cover to avoid static accumulation caused by friction of high-speed airflow and improve the operation safety inside the oil-gas separation tank.
Notas de instalación
Stop the system and release pressure before removal. Confirmar dirección de flujo y superficies de sellado antes de la instalación.
Mantenimiento y sustitución
Reemplazar según la caída de presión o el horario de mantenimiento. Inspeccione la fuga y el daño de sellado.
Antes de ordenar
Confirme la velocidad media, caudal, presión, temperatura, conexión y espacio de instalación disponible.
Opciones de entrega
Entrega o recogida de puntos de servicio. Nuestro equipo confirma el mejor arreglo basado en el destino, el peso y el tiempo de conducción.
Confirmado antes del despachado
Después de la investigación, verificamos las especificaciones, precio y estado de suministro antes de la entrega.
Apoyo continuo
Para preguntas de especificación, instalación o calidad, mantén la información de producto y pedido disponible al contactarnos.
INQUIRYEnviar una pregunta para este producto
Send your requirements for 72-12302-0801-23 and our selection team will confirm compatibility, price and lead time.
Recursos de selección
Need help confirming 72-12302-0801-23 or comparing it with another reference? Use these selection resources before ordering.



