
La filtración fiable comienza con especificaciones verificadas.
Aire acondicionado 220322559B
Elemento de sustitución de elementos del filtro del compresor del aire
Elementos de filtro de compresor de aire
220322559B is a high-performance built-in oil-gas separator core specially designed for industrial-grade and deep-hole drilling screw air compressors. As the core air purification barrier inside the a
Los pedidos son confirmados por nuestro equipo por precio, compatibilidad y entrega.
Especificaciones verificadas para una selección segura.
Confirme los requisitos de instalación con el manual del equipo o la documentación original.
| Altura | 758 mm |
|---|---|
| Diámetro exterior | 292 mm |
| Diámetro interior | 235 mm |
| OEM / Referencia Cruz | OS1275-008P, KD1275-008P, FT10024, SP1005 |
| Precisión de filtración | 3 mm |
220322559B es un núcleo de separador de gas de aceite incorporado de alto rendimiento diseñado especialmente para compresores de aire de tornillo de perforación de grado industrial y agujero profundo. Como barrera de purificación de aire núcleo dentro de la unidad de compresor de aire, puede condensar y separar eficientemente la niebla de aceite lubricante en el aire comprimido, asegurando la descarga de aire comprimido industrial de alta pureza, de bajo contenido de aceite. Mientras tanto, logra una recuperación eficiente del aceite lubricante y reduce considerablemente el consumo de aceite lubricante.
Aspectos destacados del producto básico
• Excellent Air Outlet Quality: It features an industry-leading filtration accuracy of 3 micrometers (μm). The separation efficiency for ultra-fine oil mist and oil droplets ranging from 0.1μm to 1μm reaches up to 99.9%. It strictly limits the residual oil content at the compressed air outlet to 2 - 3 PPM, effectively protecting downstream air-consuming equipment and pipelines.
• Imported Ultra-fine Fiberglass Filter Media: Multi-layer borosilicate microglass imported from the United States or Germany is adopted. This material boasts high temperature resistance, high porosity and extremely low initial resistance. When oil mist flows through the filter element, it can quickly coalesce into large oil droplets and drain back to the bottom of the oil-gas tank.
• Comprehensive Anti-static Safety Protection: The filter element undergoes rigorous electrical ground tests before leaving the factory. Anti-static conductive pins come as standard on end caps and metal meshes, which can rapidly dissipate internal static electricity generated by high-pressure and high-speed gas flow, completely eliminating the risk of air compressor unit combustion and explosion caused by static sparks.
• Collapse-resistant Mechanical Structure: Both the internal support frame and outer protective mesh are made of high-strength, corrosion-resistant perforated steel plates with advanced roll forming and welding processes. Even under extreme harsh working conditions such as cold start, heavy-load startup or high pressure differential of the air compressor, the filter element can maintain its mechanical shape without deformation or collapse (Preventing Collapse).
• Long Service Life and Low Pressure Drop: Under standard working conditions with genuine original lubricating oil, the designed service life can reach 4000 hours. The initial pressure drop is less than 0.2 Bar, which effectively reduces the energy consumption of the air compressor and cuts electricity costs.
Notas de instalación
Stop the system and release pressure before removal. Confirmar dirección de flujo y superficies de sellado antes de la instalación.
Mantenimiento y sustitución
The oil separator element is a consumable part, and its replacement shall follow the principle of "dual control of time and pressure differential". It must be replaced immediately if any of the following conditions is met: • Time cycle: Cumulative operation of 3000 ~ 4000 hours (adjusted according to specific working conditions and air quality). • Pressure differential limit: When the pressure drop across the oil separator element reaches 0.8 ~ 1.0 Bar (12 ~ 14.5 PSI), it must be replaced even if its service life has not expired. Excessive pressure differential will cause a sharp rise in motor load, a dramatic increase in power consumption, and may even damage the filter element. • Special working conditions: In high-dust harsh environments such as mine drilling and well sinking, the replacement cycle usually needs to be shortened by 20% - 30%.
Antes de ordenar
Confirme la velocidad media, caudal, presión, temperatura, conexión y espacio de instalación disponible.
Opciones de entrega
Entrega o recogida de puntos de servicio. Nuestro equipo confirma el mejor arreglo basado en el destino, el peso y el tiempo de conducción.
Confirmado antes del despachado
Después de la investigación, verificamos las especificaciones, precio y estado de suministro antes de la entrega.
Apoyo continuo
Para preguntas de especificación, instalación o calidad, mantén la información de producto y pedido disponible al contactarnos.
INQUIRYEnviar una pregunta para este producto
Send your requirements for 220322559B and our selection team will confirm compatibility, price and lead time.
Recursos de selección
Need help confirming 220322559B or comparing it with another reference? Use these selection resources before ordering.



