
La filtración fiable comienza con especificaciones verificadas.
Air/Oil Separator KD620-001
Elemento de sustitución de elementos del filtro del compresor del aire
Elementos de filtro de compresor de aire
KD620-001 is an industrial built-in air compressor oil-gas separator filter element manufactured by Keltec Technolab, a world-renowned industrial filtration brand.Core Product Advantages• Excellent Ai
Los pedidos son confirmados por nuestro equipo por precio, compatibilidad y entrega.
Especificaciones verificadas para una selección segura.
Confirme los requisitos de instalación con el manual del equipo o la documentación original.
| OEM / Referencia Cruz | 22032259,02250044-197 |
|---|---|
| Altura | 756 millas |
| Diámetro exterior | 292 mm |
| Diámetro interior | 229 mm |
| Peso | 10,5 kg |
| Precisión de filtración | 0.1 mm |
KD620-001 es un elemento de filtro industrial integrado de compresores de aire fabricado por Keltec Technolab, una marca de filtración industrial de renombre mundial.
Principales ventajas del producto
• Excelente aire Limpieza: El filtro de coalescing de microcéptico de alta calidad interna de alta calidad limita estrictamente el contenido de aerosol de aceite residual en aire comprimido a 2–3 ppm (o mg/m3). Esto no sólo reduce enormemente el consumo de aceite lubricante, sino que también protege costosos equipos de consumo de aire de precisión aguas abajo de la contaminación del petróleo.
• Rendimiento destacado de ahorro de energía: La estructura de medios de filtración óptima ofrece una baja presión inicial extremadamente baja de sólo 2-3 psi (aproximadamente 0.14–0.20 bar). Reduce significativamente la carga en el compresor de aire principal, cortando el coste total de electricidad para la operación de fábrica.
• Diseño estructural de alta resistencia: El marco de cartucho filtrante y las tapas finales están hechos de materiales metálicos anticorrosión premium, con una calificación de presión resistente al colapso de hasta 70 psi (aproximadamente 4.8 bar). El cartucho filtrante permanece libre de deformación, perforación o colapso incluso en condiciones de trabajo complejas o diferenciales instantáneos de alta presión.
• Long Service Life: At standard operating temperatures (82°C - 110°C) with proper maintenance, this filter cartridge features high dust holding capacity and stable coalescing separation efficiency, effectively extending the overall equipment maintenance interval.
Notas de instalación
Golden Fine-tuning" of the oil return pipe length: 1. KD620-001 is a deep filter element with an overall height of 756 mm. When installing the oil return pipe, the clearance between the bottom metal tube of the oil return pipe and the bottom of the oil separator core is critical. 2. Standard: Maintain a clearance of 1.5 mm to 3 mm from the bottom of the filter element. 3. Consequences: Contacting the bottom will block oil return and make oil suction impossible; excessive clearance (e.g., more than 5 mm) will leave accumulated oil at the bottom un-sucked, which will then be discharged along with air. "Cross Progressive Tightening Method" for flange bolts: 1. The filter element has an outer diameter of 292 mm and a relatively large flange plate. Do not tighten the top cover bolts of the oil-gas barrel one by one in clockwise order. 2. Correct procedure: Tighten in a diagonal (cross-staggered) sequence with three progressive torque stages (30% → 60% → 100%) to guarantee even stress distribution on the sealing surface. Verification of anti-static staples: 1. Original replacement gaskets from Keltec or Ingersoll Rand are usually fitted with several small metal staples or conductive copper strips. 2. Before fitting into the unit, use the resistance mode of a multimeter to measure the resistance between the metal top cap of the filter element and the housing of the oil-gas barrel to confirm electrical continuity (resistance close to 0). This serves as the final safeguard against explosions caused by static sparks inside the oil-gas barrel.
Mantenimiento y sustitución
Reemplazar según la caída de presión o el horario de mantenimiento. Inspeccione la fuga y el daño de sellado.
Antes de ordenar
Confirme la velocidad media, caudal, presión, temperatura, conexión y espacio de instalación disponible.
Referencia cruzada
Información de referencia asociada a este producto. Contáctenos si necesita ayuda para confirmar un número de referencia cruzada.
Opciones de entrega
Entrega o recogida de puntos de servicio. Nuestro equipo confirma el mejor arreglo basado en el destino, el peso y el tiempo de conducción.
Confirmado antes del despachado
Después de la investigación, verificamos las especificaciones, precio y estado de suministro antes de la entrega.
Apoyo continuo
Para preguntas de especificación, instalación o calidad, mantén la información de producto y pedido disponible al contactarnos.
INQUIRYEnviar una pregunta para este producto
Send your requirements for KD620-001 and our selection team will confirm compatibility, price and lead time.
Recursos de selección
Need help confirming KD620-001 or comparing it with another reference? Use these selection resources before ordering.



