
La filtración fiable comienza con especificaciones verificadas.
Air/Oil Separator Element 4930355351
Elemento de sustitución de elementos del filtro del compresor del aire
Elementos de filtro de compresor de aire
4930355351 is a core filter component specially designed for industrial oil-injected screw and sliding vane air compressors. It is mainly used to efficiently separate and recover lubricating oil from
Los pedidos son confirmados por nuestro equipo por precio, compatibilidad y entrega.
Especificaciones verificadas para una selección segura.
Confirme los requisitos de instalación con el manual del equipo o la documentación original.
| Altura | 305 mm |
|---|---|
| Diámetro exterior | 272.5 mm |
| Diámetro interior | 219 mm |
| Peso | 7.84 kg |
| Diámetro exterior de Flang | 358 mm |
| Calificación de filtración | 0.3 μm |
| OEM / Referencia Cruz | 89285779,SAO58652,SP.2336 |
4930355351 is a core filter component specially designed for industrial oil-injected screw and sliding vane air compressors. It is mainly used to efficiently separate and recover lubricating oil from compressed air, ensuring the cleanliness of the output air source and maintaining the normal circulation of the equipment lubrication system.
Core Advantages and Working Principle of the Product
• Deep Coalescing Filtration Technology.
Multi-layer ultra-fine borosilicate glassfiber is adopted as the core filter medium. When oil mist-laden compressed air passes through the filter element from outside to inside, tiny oil droplets are intercepted, collided and coalesced into large oil droplets in the fiber layers. These large oil droplets sink to the bottom of the filter element under gravity and finally flow back to the compressor lubrication system via the oil return pipe.
• High Separation Efficiency and Low Residual Oil Content.
It can effectively capture oil mist particles of 0.3 micron and above, keeping the oil content at the compressed air outlet at an extremely low level (typically 1–3 ppm), and protecting downstream pneumatic tools and gas-consuming equipment from oil contamination.
• High-strength Explosion-proof and Pressure-resistant Structure.
Equipped with thickened galvanized anti-corrosion metal end caps and high-strength inner and outer support screens, it can withstand sharp differential pressure fluctuations at the moment of compressor start-up or loading, preventing the filter element from deformation or collapse under high-temperature and high-pressure working conditions.
• Precision Oil-resistant Sealing Design.
The top flange comes with a high-performance oil-resistant rubber/fiber composite gasket, ensuring a tight seal of the oil-gas tank cavity after installation and preventing unfiltered oil-gas from bypassing directly into the air supply pipeline network.
Typical Application Scenarios and Replacement Cycle
• Applicable Equipment.
Widely used for various industrial stationary and mobile air compressors (especially common in Ingersoll Rand series models, corresponding to the original part number 89285779).
• Recommended Replacement Cycle.
Under standard industrial environments, replacement is generally recommended every 3,000 to 4,000 operating hours. If the equipment operates for a long time in high-temperature and high-dust environments, or the oil separator differential pressure gauge reading exceeds 0.8–1.0 bar, early replacement shall be carried out to reduce the energy consumption of the main unit.
Notas de instalación
Stop the system and release pressure before removal. Confirmar dirección de flujo y superficies de sellado antes de la instalación.
Mantenimiento y sustitución
Reemplazar según la caída de presión o el horario de mantenimiento. Inspeccione la fuga y el daño de sellado.
Antes de ordenar
Confirme la velocidad media, caudal, presión, temperatura, conexión y espacio de instalación disponible.
Referencia cruzada
Información de referencia asociada a este producto. Contáctenos si necesita ayuda para confirmar un número de referencia cruzada.
Opciones de entrega
Entrega o recogida de puntos de servicio. Nuestro equipo confirma el mejor arreglo basado en el destino, el peso y el tiempo de conducción.
Confirmado antes del despachado
Después de la investigación, verificamos las especificaciones, precio y estado de suministro antes de la entrega.
Apoyo continuo
Para preguntas de especificación, instalación o calidad, mantén la información de producto y pedido disponible al contactarnos.
INQUIRYEnviar una pregunta para este producto
Send your requirements for 4930355351 and our selection team will confirm compatibility, price and lead time.
Recursos de selección
Need help confirming 4930355351 or comparing it with another reference? Use these selection resources before ordering.



