
La filtración fiable comienza con especificaciones verificadas.
Air Oil Separator 1092081300
Elemento de sustitución de elementos del filtro del compresor del aire
Elementos de filtro de compresor de aire
1092081300 (also written as 1092-0813-00) is a high-efficiency oil-gas separator filter element specially designed for oil-injected screw air compressors. It is used to thoroughly separate lubricating
Los pedidos son confirmados por nuestro equipo por precio, compatibilidad y entrega.
Especificaciones verificadas para una selección segura.
Confirme los requisitos de instalación con el manual del equipo o la documentación original.
| Altura | 620 mm |
|---|---|
| Diámetro exterior | 467 mm |
| Diámetro exterior de Flang | 600 mm |
| Calificación de filtración | 0,01μm |
| Peso | 8 kg |
1092081300 (also written as 1092-0813-00) is a high-efficiency oil-gas separator filter element specially designed for oil-injected screw air compressors. It is used to thoroughly separate lubricating oil mist from clean gas in compressed air, ensuring air quality and the economic efficiency of lubricating oil circulation.
Principales ventajas de rendimiento
• Separación de gas de aceite de alta precisión.
Adopts imported multi-layer composite superfine glassfiber filter media with a filtration accuracy of 0.01 – 1 μm and a separation efficiency as high as 99.9% – 99.99%.
• Extremely low oil content in exhaust gas.
The residual oil content of exhaust gas is strictly controlled at ≤ 3 ppm, which effectively reduces lubricating oil loss and prevents oil contamination of downstream pneumatic equipment and precision gas-consuming terminals.
• Diseño de baja presión y ahorro de energía.
The optimized folded and wound structure provides sufficient dust holding capacity and flow area, with an initial pressure difference ≤ 0.02 MPa, greatly cutting down the energy consumption of the air compressor.
• High temperature, high pressure and corrosion resistance.
The inner and outer frames adopt high-strength rust-proof galvanized steel perforated mesh, matched with high-temperature-resistant special epoxy resin end cap adhesive. It can operate stably for a long time under normal working conditions of -10℃ to +100℃ (up to 120℃ instantaneously) and 0.7 – 1.3 MPa.
• Anti-static safety structure.
The built-in flange version is equipped with professional anti-static diversion metal pins (grounding devices) to effectively discharge static electricity generated by high-speed friction of oil and gas, eliminating the risk of static ignition inside the oil-gas barrel.
Notas de instalación
Stop the system and release pressure before removal. Confirmar dirección de flujo y superficies de sellado antes de la instalación.
Mantenimiento y sustitución
Reemplazar según la caída de presión o el horario de mantenimiento. Inspeccione la fuga y el daño de sellado.
Antes de ordenar
Confirme la velocidad media, caudal, presión, temperatura, conexión y espacio de instalación disponible.
Opciones de entrega
Entrega o recogida de puntos de servicio. Nuestro equipo confirma el mejor arreglo basado en el destino, el peso y el tiempo de conducción.
Confirmado antes del despachado
Después de la investigación, verificamos las especificaciones, precio y estado de suministro antes de la entrega.
Apoyo continuo
Para preguntas de especificación, instalación o calidad, mantén la información de producto y pedido disponible al contactarnos.
INQUIRYEnviar una pregunta para este producto
Send your requirements for 1092081300 and our selection team will confirm compatibility, price and lead time.
Recursos de selección
Need help confirming 1092081300 or comparing it with another reference? Use these selection resources before ordering.



