
La filtración fiable comienza con especificaciones verificadas.
Air/Oil Separador 2906095500
Elemento de sustitución de elementos del filtro del compresor del aire
Elementos de filtro de compresor de aire
Oil application for sealing gaskets: Before installation, apply a thin layer of air compressor lubricating oil to the surface of the new O-ring or flange sealing gasket. This ensures smooth tightening
Los pedidos son confirmados por nuestro equipo por precio, compatibilidad y entrega.
Especificaciones verificadas para una selección segura.
Confirme los requisitos de instalación con el manual del equipo o la documentación original.
| Altura | 450mm |
|---|---|
| OEM / Referencia Cruz | 1623051599,1623051500 |
| Diámetro exterior | 399 mm |
| Diámetro interior | 315 mm |
| Peso | 17.03kg |
| Precisión de filtración | 0.1 mm |
Oil application for sealing gaskets: Before installation, apply a thin layer of air compressor lubricating oil to the surface of the new O-ring or flange sealing gasket. This ensures smooth tightening and greatly improves airtightness, preventing the gasket from shifting or twisting during compression.
Principales ventajas
• Ultra-high exhaust purity (efficient oil removal):
The filter element adopts multi-layer composite superfine glass fiber inside, which can efficiently coalesce micron and submicron oil mist droplets. After separation, the oil content of discharged compressed air can be reduced to an extremely low range of 1–3 ppm, effectively preventing pipeline contamination and protecting expensive downstream air-consuming equipment and pneumatic components.
• Remarkable energy saving and consumption reduction (low pressure drop design):
The product features excellent air permeability with an initial resistance below 0.02 MPa. It maintains an extremely low pressure drop throughout its service life. This means the air compressor motor does not need extra work to overcome resistance, thereby greatly cutting the enterprise's electricity cost during long-term operation.
• Long-lasting pressure resistance and safety protection:
High-strength corrosion-resistant alloy steel is used for the frame and flange, combined with a patented anti-static conductive strip design. It can withstand abnormal pressure differential impacts up to 5 bar to prevent the filter element from collapsing, and can timely discharge static electricity generated by friction of high-speed airflow, completely eliminating the risk of combustion and explosion caused by static sparks inside the machine.
• Original one-stop kit (all-in-one package):
Supplied in the form of a maintenance kit. In addition to the main filter element, it is fully equipped with fluororubber O-rings and special high-temperature resistant sealing gaskets. It ensures that peripheral sealing parts can be replaced synchronously during each maintenance to achieve 100% air tightness and eliminate risks of air and oil leakage.
Notas de instalación
Removal of the Old Oil Separator Core Remove external pipelines: Carefully detach the oil return pipe on the oil-gas barrel cover with a wrench (take care not to lose the sealing copper washer at the pipe end fitting). Remove control pipelines (such as the pipeline of the pressure maintaining valve, sensor cables and other components hindering disassembly). Remove barrel cover bolts: Use a socket wrench to loosen and remove the fastening bolts on the top cover of the oil-gas barrel one by one in a diagonal cross sequence. Take out the old oil separator: Lift the barrel cover vertically upward and remove it. Take out the old oil-gas separator core and the old sealing gaskets on both sides of the flange. Cleaning and inspection: Wipe the flange surface of the oil-gas barrel and the sealing groove of the top cover clean with a clean lint-free cloth (do not let foreign matter fall into the oil barrel). Pull out the copper tube of the oil return pipe, check whether the pipe end is worn and whether the beveled opening is unobstructed, and clean the oil return check valve.
Mantenimiento y sustitución
Differential Pressure Alarm (Replace Immediately): When the control panel shows that the differential pressure across the oil separator element reaches 0.8 ~ 1.0 bar (approximately 12 ~ 15 psi), it indicates that the separator is severely clogged and must be replaced immediately; otherwise, it will cause motor overload and a sharp increase in energy consumption. Air filter element: Replace every 2,000 ~ 4,000 hours (traps dust and prevents the oil separator from premature clogging). • Oil filter element: Replace every 2,000 ~ 4,000 hours (removes impurities in oil to avoid screw rotor scratching and oil separator blockage). • Lubricating oil: Replace together with the oil separator every 4,000 or 8,000 hours (depending on whether semi-synthetic or fully synthetic oil is used).
Antes de ordenar
Confirme la velocidad media, caudal, presión, temperatura, conexión y espacio de instalación disponible.
Referencia cruzada
Información de referencia asociada a este producto. Contáctenos si necesita ayuda para confirmar un número de referencia cruzada.
Opciones de entrega
Entrega o recogida de puntos de servicio. Nuestro equipo confirma el mejor arreglo basado en el destino, el peso y el tiempo de conducción.
Confirmado antes del despachado
Después de la investigación, verificamos las especificaciones, precio y estado de suministro antes de la entrega.
Apoyo continuo
Para preguntas de especificación, instalación o calidad, mantén la información de producto y pedido disponible al contactarnos.
INQUIRYEnviar una pregunta para este producto
Send your requirements for 2906095500 and our selection team will confirm compatibility, price and lead time.
Recursos de selección
Need help confirming 2906095500 or comparing it with another reference? Use these selection resources before ordering.



